Figure 12 – Info Panel

The Info Panel contains:

• Time and date the last test was conducted
• Name of the operator who conducted the test
• Type of test
• Type of vehicle
• Vehicle Identification Number (VIN) of the vehicle to be tested
• Date-of-Manufacture (DOM) of the vehicle to be tested

Right-hand side of the panel displays real-time status indicators.

• MCU indicator. If indicator is gray with a slash through it, the MCU is not communicating properly. Yellow indicates MCU is connected properly.
• Reference indicates the pressure present at the sensor designated as the Reference Sensor. Displayed as either psi or kPa.
• Ready Up/Ready Down. An indicator (just below the Reference pressure) showing if the system is ready to test when the pressure at the Reference Sensor has reached 95 psi.